product descript ion
900/1000 cleaner is based on differences in the slurry contained in the relative weight of impurities using centrifugal principle to remove its new generation of products, the product is in use on the basis of the first generation of products, according to domestic and international users feedback, designed to address the problem of slag mills designed products. The product can greatly reduce the need to adjust the structure according to the user to achieve the purpose of each individual light and heavy impurities separation, separation of heavy impurities together, allowing users one-time investment. The product is separable heavy impurities gravel, iron, paint and other heavy mixtures. Light impurities plastic sheets, foams, gases, ink, dust or the like.
Zibo yunfeng industrial ceramics co., LTD
The main technical parameters
Into the plasma capacity: 900-1100L / min
Good pulp: 900-1000L / min
Slag weight: 50L / min
Into the plasma pressure: 0.2-0.4MPa
Inlet consistency: 0.5-1.20%
Maximum operating temperature: 80 ℃
产品概述
900/1000除渣器是根据浆料中所含杂质相对比重的差异利用离心原理将其去除的新一代产品，该产品是在第一代产品的使用基础上，根据国内外用户的意见反馈，专为解决纸厂的除渣难题而设计的产品。该产品可根据用户需要调整结构，使其分别达到单独分离重杂质和轻、重杂质一起分离的目的，从而使用户的一次性投资额大大降低。该产品可分离的重杂质有砂石、铁屑、涂料及其他重质混合物。轻杂质有塑料片、泡沫、气体、油墨、粉尘等。
900/1000 cleaner is based on differences in the slurry contained in the relative weight of impurities using centrifugal principle to remove its new generation of products, the product is in use on the basis of the first generation of products, according to domestic and international users feedback, designed to address the problem of slag mills designed products. The product can greatly reduce the need to adjust the structure according to the user to achieve the purpose of each individual light and heavy impurities separation, separation of heavy impurities together, allowing users one-time investment. The product is separable heavy impurities gravel, iron, paint and other heavy mixtures. Light impurities plastic sheets, foams, gases, ink, dust or the like.
Zibo yunfeng industrial ceramics co., LTD
The main technical parameters
Into the plasma capacity: 900-1100L / min
Good pulp: 900-1000L / min
Slag weight: 50L / min
Into the plasma pressure: 0.2-0.4MPa
Inlet consistency: 0.5-1.20%
Maximum operating temperature: 80 ℃
产品概述
900/1000除渣器是根据浆料中所含杂质相对比重的差异利用离心原理将其去除的新一代产品，该产品是在第一代产品的使用基础上，根据国内外用户的意见反馈，专为解决纸厂的除渣难题而设计的产品。该产品可根据用户需要调整结构，使其分别达到单独分离重杂质和轻、重杂质一起分离的目的，从而使用户的一次性投资额大大降低。该产品可分离的重杂质有砂石、铁屑、涂料及其他重质混合物。轻杂质有塑料片、泡沫、气体、油墨、粉尘等。
主要技术参数
进浆能力：900-1100L/min
良浆： 900-1000L/min
重渣： 50L/min
进浆压力：0.2-0.4MPa
进浆浓度：0.5-1.20％
最大工作温度： 80℃
进浆能力：900-1100L/min
良浆： 900-1000L/min
重渣： 50L/min
进浆压力：0.2-0.4MPa
进浆浓度：0.5-1.20％
最大工作温度： 80℃
